In general, when we use stone saw blades, we often encounter various problems, including common burning pieces, kindling, jumping knives, falling pieces, and not sharp, here we will carefully say it!
Common cutting problems of stone saw blades:
Cutting and burning: the stone saw blade carcass is too strong, the diamond falls off improperly or the diamond cutting edge height is not enough;
Cutting spark: Spark phenomenon is also caused by improper diamond distribution, or the body is too hard, too soft will also affect;
Cutting skip knife: improper diamond shedding in the stone saw blade will cause skip knife, because the diamond is unevenly distributed in the matrix, some places are too clustered, and some places are too little;
Cutting blocks: The sintered body of the stone saw blade is loose, and the material segregation will cause the saw blade to fall off during the cutting process;
Cutting is not sharp: in the temperature sintering process of the saw blade, the temperature gradient between the top and the root of the tooth, the active state of the powder and the difference in the distribution of low melting point materials lead to changes in the sintering structure and mechanical properties; The accumulation of heat in the cutting process weakens the microstructure and mechanical properties of the welded body of stone saw blade. The strength of the matrix is weakened by the vibration and impact force conducted by the diamond, resulting in the holding power of the matrix to the diamond is reduced.
Stone is characterized by hard texture and wear resistance, chemical stability, not easy to weather, color and appearance can be maintained for a long time, corrosion resistance, so it is widely used in outdoor decoration, stone stone how to cut the edge? Changli stone cutting sheet is your preferred brand.
Some stone prices are relatively expensive, if the edge of the cutting process will cause two adverse effects, one is the need to re-cut to increase the waste of materials, the other is to reduce work efficiency, so the urgent need to cut the stone saw blade without explosive edge.
Common types of stone saw blades when cutting:
1, sesame white: stone, hard texture, delicate as snow, can be used for windowsills, countertops and stepping stone stair boards.
2, rust stone: a kind of stone. Rust stone can be used as polishing board, fire board, sheet, table panel, environmental stone, paving stone, road extension stone, small square, wall stone, good color effect, low price, landscape stone often do litchi surface and burning surface.
3, sesame black: sesame black is one of the world’s most famous stone stone species, a large number of used for export abroad, is also the main choice of foreign landscape stone, can be used for square engineering board environmental decoration along the road stone and other buildings and garden stone, single color, the overall decorative effect is good.
Post time: Jul-21-2023
